Schaeffler Rulmanları Tic. Ltd. Şti.

The eDifferential supports the steering function and has a positive effect on driving dynamics, safety and driving comfort.

The Serial Hybrid

The lightweight differential

The overrunning alternator pulley is one of the “unsung heroes”. This inconspicuous component reduces vibrations and improves the energy efficiency of modern engines.

The Parallel Hybrid

The overrunning alternator pulley

LuK now manufactures more than 100,000 dry dual clutches per month.

LuK now manufactures more than 100,000 dry dual clutches per month.

The innovative thermal management module from Schaeffler reduces fuel consumption and CO2 emissions by up to four percent.

The rolling bearing supports reduce friction and enable a new balancer shaft design with an optimized mass.

Rotary slide valves controlled by sensors enable the ideal temperature window for the engine and transmission to be reached quickly.

The temperature of the motor, turbocharger and transmission as well as the interior can be precisely controlled with the thermal management module.

The temperature of the motor, turbocharger and transmission as well as the interior can be precisely controlled with the thermal management module.

Rotary slide valves controlled by sensors enable the ideal temperature window for the engine and transmission to be reached quickly.

LuK offers both “dry” and “wet” dual clutch solutions.

The new FAG spindle bearings RS have large size balls, a nominal contact angle of 20 degrees and an internal construction for optimized friction.

Lightweight and compact: The new INA thread guidance roller FRM now has a deep drawn outer ring, which means it is manufactured without cutting. The lower mass provides a considerably improved acceleration capacity.

The new FAG high-tech Cronitect hybrid rolling bearing: Increased load carrying capacity, smooth running and reliability.

Mounting of spindle bearings

Hydrostatic compact guidance system.

High-speed KUVE-B-HS profiled rail linear guides offer speeds of up to 10 meters per second without losses in load carrying capacity and rigidity.

The X-life machined needle roller bearing with the Twin Cage: This new combination of cage and rolling elements achieves a significantly lower frictional torque.

The drives in the rotary high performance series RKI from IDAM have torque levels 30 percent higher than conventional torque motors. The speed and mechanical power have been increased by a factor of five. At the same time, the power loss is reduced by up to 60 percent.

With torque motors of a segment construction, INA Drives & Mechatronics GmbH & Co. oHG (IDAM) offers a very high level of cost-effectiveness. The motors make a convincing case by means of high speeds and ease of maintenance.

The new thermally resilient FAG cylindrical roller bearing TR combines, for the first time, the reliable non-locating bearing function of cylindrical roller bearings with suitability for high speeds and varying temperature differences.

Up to 35 percent less friction – the Schaeffler Group is setting the new standard for deep groove ball bearings with the new FAG Generation C deep groove ball bearing.

Heavy duty linear recirculating roller bearing and guideway assembly RUE.

Linear roller bearing RUS and flat cage guidance system M/V.

With torque motors of a segment construction, INA Drives & Mechatronics GmbH & Co. oHG (IDAM) offers a very high level of cost-effectiveness. The motors make a convincing case by means of high speeds and ease of maintenance.

The improved contact between the end face and rib reduces the friction and significantly increases the axial load carrying capacity of cylindrical roller bearings.

The new thermally resilient FAG cylindrical roller bearing TR combines, for the first time, the reliable non-locating bearing function of cylindrical roller bearings with suitability for high speeds and varying temperature differences.

ACTIVeDRIVE - Electric Vehicle with Active Torque Distribution.

Flexible: Schaeffler can supply INA compacting roller OWA without a roller covering if required. This enables customers to customize the roller to their own requirements.

The drives in the rotary high performance series RKI from IDAM have torque levels 30 percent higher than conventional torque motors. The speed and mechanical power have been increased by a factor of five. At the same time, the power loss is reduced by up to 60 percent.

The current Schaeffler product range includes more than 400 different overrunning alternator pulleys and more than 140 million of these components have been manufactured in 15 years.

The overrunning alternator pulley is one of the “unsung heroes”. This inconspicuous component reduces vibrations and improves the energy efficiency of modern engines.

deep groove roller bearing with Lubtect® compound for a reliable supply of lubricant even under critical operating conditions.

Needle roller bearing with Lubtect® compound for a reliable supply of lubricant even under critical operating conditions.

Spherical roller bearing with Lubtect® compound for a reliable supply of lubricant even under critical operating conditions.

The innovative design of the Schaeffler lightweight differential with the axial spline design gives significant advantages in terms of space, weight and power consumption.